Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography)

● Each sterile strip is impregnated with 1 mg of fluorescein sodium USP — the standard strength for diagnostic ocular staining [1][2][3] ●

Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography) product packaging
Ophthalmic Diagnostics

Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography)

● Each sterile strip is impregnated with 1 mg of fluorescein sodium USP — the standard strength for diagnostic ocular staining [1][2][3]
● Paper strip coated at one end with the dye, individually wrapped in a sterile pouch (single-use unit) [1][2][3]
● Diagnostic staining: corneal scratches stain green, conjunctival scratches stain yellow-orange, and foreign bodies are surrounded by a green ring [3]
● Pack structure: 1 strip per pouch, 10 pouches per small box (10 strips per small box); reference packs contain 100 or 300 strips per carton — pack configuration may vary by product and market [1][2][3]

Product NameFluorescein Sodium Ophthalmic Test Strips(Fundus Angiography)
Dosage FormDiagnostic strip
StrengthIt consists of a filter paper soaked in sodium rhodamine and a handheld handle.
StandardsBP / ENTERPRISE
Packing5 mL amber ampoule, 5 ampoules/box
DocumentsCOA, COPP, DMF, CTD Dossiers
MOQContact us for MOQ and current stock
Request Quotation › ← Back to Ophthalmic Diagnostics
WHO Prescribing Guidance

Indications · Administration · Dosage · Precautions

Reference information summarised from WHO prescribing guidance. Expand each item below — clinical use must always follow the locally approved product insert.

🎯Indications▾
● Staining of the anterior segment of the eye when fitting contact lenses [1][2][3] ● Disclosing corneal injury [2] ● Applanational tonometry (measurement of intraocular pressure) [2][3] ● Helping the doctor or eye specialist to examine the eye (diagnostic agent) [3] ● Suitable for children, adults and the elderly when applied by a doctor or eye-care professional [3]
💧Administration▾
● The doctor or eye specialist applies the strip; remove any soft contact lenses before application [3] ● Take the strip out of the envelope holding the handle end; do not touch the dye-impregnated tip [3] ● Moisten the impregnated tip with one or two drops of sterile irrigating or saline solution (sterile eyewash, water or saline) before application to ensure full fluorescence and patient comfort [1][2][3] ● Touch or gently stroke the moistened tip across the conjunctiva or fornix as required; ask the patient to blink several times to spread the dye evenly [1][2][3] ● Each strip is for single use only — discard after use; excess fluorescein may be rinsed away with sterile eyewash [3]
⚖️Dosage▾
This product is a diagnostic agent, not a therapeutic medicine. Use one sterile strip per eye as required for the diagnostic procedure; do not reuse a strip [3].
⚠️Precautions & Warnings▾
● Do not use if the patient is allergic to fluorescein or to any component of the strip [3] ● Do not use with soft contact lenses in place — remove them before application and do not re-insert until the dye has completely worn off [3] ● For external ophthalmic use only; do not inject [1][3] ● Do not use if the strip pouch has been damaged or previously opened — the contents may no longer be sterile [1][2][3] ● Do not touch the dye-impregnated tip when handling the strip [3] ● Vision may be blurred after application; this clears within a few minutes — wait until vision is clear before driving or using machines [3] ● Very rare side effects: allergic reactions with redness and irritation of the eye, swelling around the eye, severe allergic reaction with difficulty in breathing and symptoms of shock, or an itchy skin rash with raised red blotches — seek immediate medical attention if these occur [3] ● Storage: store at 10–30 °C (or below 30 °C; do not store above 25 °C per some labels); do not freeze; keep in the original package to protect from light [1][2][3] ● Once opened, use the strip immediately and discard it after use; keep out of the reach and sight of children [3] For full prescribing information, refer to the approved product label / package leaflet of the product concerned [1][2][3].

Reference: WHO Model Formulary / WHO Model List of Essential Medicines. For professional reference only — clinical use must follow the locally approved product insert and national treatment guidelines.

Why Order From Us

Factory Direct. Fully Documented.

🛡️

GMP Quality

Full batch testing and quality traceability under standard GMP workshops.

🚢

Fast Delivery

Sufficient stock on regular items, familiar with export logistics to 50+ countries.

📑

Registration Support

COA, DMF, dossier and legalization documents for your market registration.

FAQ

Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography) — Frequently Asked Questions

Which documents are provided for Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography) registration?

Every batch of Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography) ships with a Certificate of Analysis (COA). For market registration we provide COPP, DMF and CTD-format dossiers, plus legalisation support where your authority requires it.

What is the MOQ and lead time for Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography)?

MOQ and lead time for Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography) depend on strength, packaging and destination market. Send us your target market and annual volume — our export team confirms current stock, MOQ and lead time within 24 hours.

Do you support OEM / private label?

Yes. We offer OEM packaging and private-label production for Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography), subject to the regulatory requirements of the destination market.

Which markets have you exported ophthalmic diagnostics products to?

We have supplied ophthalmic diagnostics products to 50+ countries across Africa, Southeast Asia, Latin America and the Middle East, with experience in ministry-of-health registration and international tenders.

How is the quality of Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography) controlled?

Fluorescein Sodium Ophthalmic Test Strips(Fundus Angiography) is produced in China-GMP workshops (site re-inspected and passed in 2026), released only after full QC testing against BP / enterprise standards, with retained samples kept for one year beyond the product's expiry date.

Ask About This Product ›
✎ 💬 ↑
👋 Hi! I'm Care, your product guide. Tap me to ask about our medicines & APIs. ×
Care - product guide assistant